POP BLUETOOTH. Руководство по эксплуатации Ögretim Kılavuzu. English. Français. Deutsch. Español. Italiano. Português العربية. Pусский.

Transcription

1 English Français Deutsch Español Italiano Português 中文日本語한국어 العربية Pусский POP BLUETOOTH Türk Instruction Manual Manuel d utilisation Bedienungsanleitung Manual de instrucciones Manuale di istruzioni Manual de instruções 使用手冊取扱說明書사용설명서 Руководство по эксплуатации Ögretim Kılavuzu 1

2

3 B Welcome English Contents 1. POP Bluetooth basics 2 2. Connect 3 3. Communicate 5 4. Specifications 6 5. Safety information 6 In the box 1. POP Bluetooth Handset 2. Micro-USB Cable 3. Felt Mat 4. Quick start guide 5. Instruction Manual 1

4 English POP Bluetooth basics Powering up It takes 3-4 hours to fully charge the handset using the micro-usb cable. Talk time Up to 8 hours Standby Up to 100 hours Charging When charging a red LED will appear. When the handset is fully charged the LED will turn off. Low battery the red LED will flash. TURNING THE HANDSET ON AND OFF Press and hold the button for 4 seconds a blue LED will flash. Repeat to turn-off. 2

5 Connect English 1 When the handset is off; press and hold the button for 5 seconds until the red and blue LED s flash alternately. you are now ready to pair 5 sec. 2 Activate the Bluetooth setting on your device (the device needs to be within a metre of the handset) within 1 meter 3 Your device will either automatically search for available Bluetooth devices or alternatively manually instruct your device to search for Bluetooth devices 4 Select POP Bluetooth - If asked enter password The blue LED will flash every 4 seconds you are now connected You only need to pair your device once. To pair other devices please repeat the above steps. You can pair up to 8 devices. 4 sec. 3

6 English Bluetooth wireless Range The Bluetooth wireless signal range is up to 10 metres from your mobile device. AUTOMATIC RECONNECTION If your mobile device goes out of range the purple LED will flash. Once the mobile device is back in range the handset will automatically reconnect to the last connected mobile and the blue LED will flash every 4 seconds. If the mobile device does not automatically reconnect, use your mobile devices Bluetooth menu to reconnect manually. 4

7 Communicate English MAKING A CALL Dial the number as usual Answering/ending a call Click the button Voice activated dialing Click the button - you hear the alert beep - state the name of the person you wish to call* *not all devices support this function Last number Redial Double click the button 2 Reject a call Press and hold the button for 2 seconds Volume control Increase and decrease volume using the + and volume control buttons during the call Ringing Volume Increase and decrease ringer volume using + and volume control buttons when in standby mode Mute Press the + and - volume buttons together to mute. Repeat to un-mute For further help regarding your POP Bluetooth visit : nativeunion.com/support 5

8 English specifications Bluetooth specs: V2.1 Radio frequency range: GHz Output Power Class: Class 2 Maximum range (Open space): 10 metres Supported profiles: HSP, HFP Type of Battery: Lithium-ion Polymer Talk Time: up to 8 hours Standby: up to 100 hours Audio Output: 10mW RMS Power supply: DC5V Operating temperature: 0 to 45C Safety Information Please read the instructions carefully. This product has been designed and manufactured to meet strict quality and safety standards. However, please take note of the following important safety information. Do not use this apparatus near water. Take care not to spill liquids on the POP Bluetooth. If your POP Bluetooth gets wet, unplug it from your mobile and allow it to dry thoroughly. Please note that damage caused by liquid is not covered by the warranty. Only clean with a dry cloth. Do not use any cleaning solvents or products. To prevent possible hearing damage, do not listen at high volume levels for long periods. 6

9 FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 condition: 1.this device may not cause harmful interference, and 2.this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. IMPORTANT SAFETY WARNINGS 1.FCC regulations state that any change or modification to the equipment, not expressly approved by the manufacturer or its authorized parties, could void user s authority to operate this equipment. 2.To prevent fire or electric shock, do not expose the unit to rain or moisture. 3.Never attempt to open the casing. Always refer servicing to a qualified technician. FCC NOTICE (USA) As specified in Part 15 of the FCC Rules, this equipment complies within the limits of a Class B digital device. These restrictions restrictions provide sufficient against radio and TV interference in residential areas. However, even during normal operation, this device may cause TV or radio interference. In attempting to eliminate some or all interference, you should try one or more of the following corrective measures: 1.Increase the distance between the device and the radio and/or TV 2.Try a different outlet on various electrical circuits for the device, the radio and/ or TV. 3.Reposition the receiving antenna English Disposal of old electrical and electronic equipment: After the implementation of the European DIrective 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their services lives to the public collecting points set up for this porpuse or point sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making and inportant contributions to protecting our environment. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. And any use of such marks by Design Pool Limited is under licence. Bluetooth QDID : B Spec. is subject to change without prior notice. Assembled in China Native Union and Native Union Logo are registered trademarks of Design Pool Ltd All other trademarks and registered trademarks are the property of their respected owners. Other products and company names mentioned herein may be trademarks of their respective companies. 7

10 nativeunion.com